Menu
Cart 0

News — Replacement sign faces

Replace old sign faces with tracked V3 GlasSteel Fiberglass sign plastic

Posted by Joe Giral on

Replace old sign faces with tracked V3 GlasSteel Fiberglass sign plastic

If you have an older Outdoor Signs America [OSA] sign, we have a way to replace the worn sign faces with new GlasSteel V3 Fiberglass faces. The flat-face portable signs are no longer made and we will miss the smooth lines and  flat sign faces, but perhaps not miss as much the tendency to buckle and warp in the heat. If you have an old "OSA" sign, you will not be able to find replacement sign faces because they're no longer made or available. We have good news for you. Our V3 fiberglass 'faces' will fit on your OSA sign...

Read more →

Where can I order sign frames for the outside signs on buses?

Posted by Joe Giral on

Where can I order sign frames for the outside signs on buses?

Where can I order custom frames for signs on the sides of buses and trollies? Here are a few resources.

Read more →

Bus Advertising Signs, inside and outside of buses and on bus stops

Posted by Joe Giral on

Bus Advertising Signs, inside and outside of buses and on bus stops

Bus Advertising Signs There are three categories of sign types listed here. Look up which one most closely resembles what you seek or contact us for an estimate for your bus signs printing project.  [1] Rigid Metal SignsPopular for bus stop pole signs, these are usually printed on a coated reflective substrate like aluminum or alumicore (aluminum over a plastic core sandwich). Reflective finishes for nighttime illumination from headlights, is available in three grades ranging from Engineer to High Intensity and Diamond grades, with Diamond [DG] being the most reflective and Engineer being the least reflective.3M has a short video on the differences in...

Read more →

Replace Your Store's Plastic Sign Faces Yourself

Posted by Joe Giral on

Replace Your Store's Plastic Sign Faces Yourself

What are the different kinds of Replacement Sign Faces? Read about "How to install" below.Sign faces are the plastic or fiberglass sign panels that usually have track and letters for a changeable or permanent message board. Some may have graphics or photos as well. The sign faces can be replaced by almost anyone with simple tools, a ladder and average aptitude or skills (and sometimes a 'cherry picker' truck for hard-to-access locations)What do I need to know before replacing a worn or broken sign face?Here are the things we need to know to help you find a good replacement:[1] Identify the kind of...

Read more →

Storm and vandal-damaged signs, insurance and claims

Posted by Joe Giral on

Storm and vandal-damaged signs, insurance and claims

This is a brief review of the options for making a claim when your sign is vandalized or otherwise damaged in an accident, fire or storm. If you've experienced damage or need replacement signs, immediately take photos of the damage close up and at a short distance so the damage can be viewed in context of its surroundings. Your insurance agency may have a form for you to go over items like a checklist so you can write down items damaged or lost as you remember them. Note that signs are usually NOT included in insurance checklists and are costly...

Read more →


@media screen and (max-width: 768px) { .header-logo .lazyload__image-wrapper { margin: 0 auto; } .grid-item.large--one-half.text-center.large--text-right { display: none; } }